 |
GR
2400 Control Panel
The
Gr 2400 panel is available in two sizes:
- up to 32 relays
- up to 48 relays
The complete digital solution to lighting controls...more |
|
 |
GR 2400™ XPoint Router
An XPoint Router consists of two types of control cards:
1) The XPoint Router Board
2) The XPoint Driver Board
... more |
| |
|
|
|
|
 |
The
Blue Box™
The
GR 1400 (Blue Box) is the 100% digital replacement for the old clock, twist
timers and contactors solution to lighting control...more |
|
 |
The
XPoint Module
The
XPoint module provides all the features of a networked relay without the panel. Use the XPoint module to control an individual fixture, a string of fixtures, a 20A circuit or anything in between...more |
| |
|
|
|
|
 |
The
Blue Box™ LT
All the same features of the original Blue Box, only smaller! The new Blue Box LT is perfect for small projects, so saying goodbye to time-consuming contactor assemblies is easier than ever...more |
|
 |
MicroPanel
Distributed control panels with 2 or 4 switched or dimmed outputs. Inputs for photo sensors, digital switches, occupant sensors...more |
| |
|
|
|
|
 |
The SnapLink
Relays
The
SnapLink Relays are relays for control panels of the GR 2400 system...more |
|
 |
DMX Control
Panels
The
DMX Control Panel employs a DMX 512 command to turn on and off SnapLink Relays...more |
| |
|
|
|
|
 |
Dual Voltage
Switch
Normally
Open electrically held relay which allows a single-pole switch to control
loads operating at two different voltages...more |
|
 |
SmartBreaker
Panel
Seamlessly
integrates any LC&D device. Mix conventional and controllable breakers in
the same panelboard ... more |
| |
|
|
|
|
 |
SilverBullet™
limits the wattage (VA) of each track circuit by enforcing a definite current limit
- often an allowable alternate to lineal foot deductions for track lighting
in many energy codes. The SilverBullet is placed in-line between the branch
circuit breaker and track-mounted lighting loads...more |
|
 |
Emergency
Shunt Relay
Normally-closed
electrically-held relay to be wired in parallel with a wall switch...more |
| |
|
|
|
|
 |
The
MicroPhase™
The MicroPhase is an extension of the MicroPanel-iDim. The compact, self-contained
enclosure utilizes a single module for phase dimming of (1) 20 amp or (2)
10 amp loads...more |
|
 |
GR 2400™ w/ Surge Suppression
100% Digital pre-wired, factory assembled GR2400 relay panel integrated with a surge suppression solution to lighting control... more |
| |
|
|
|
|
 |
quintessence GR 2400™ Relay Panel/Breaker Panel
100% Digital Pre-wired, factory assembled GR2400 relay panel integrated with a standard breaker panel to provide over-current protection as well as lighting control... more |
|
 |
quintessence GR 2400™ Relay Panel/Silver Bullet
100% Digital pre-wired, factory assembled GR2400 relay panel integrated with a Sub-Branch Circuit Current Limiter solution to lighting control... more |
| |
|
|
|
|
 |
GR 2400™ Master Controller
100% Digital Pre-wired, factory assembled. GR 2400 Systems wiht distributed control do not always require a Master panel... more |
|
 |
Snap Link™ Latching Relay
The SnapLink™ Latching Relay from LC&D is a single-pole, lighting relay designed to meet the demands of today’s high-efficiency ballast loads... more |
| |
|
|
|
|
 |
DMX SmartBreaker™ Panel
A DMX-only panel which employs a DMX 512 command to turn on and off SmartBreakers... more |
|
 |
Academy Pack
Academy Pack is a
complete, stand-alone, dimming/switching control solution. It is designed to enhance...more |
| |
|
|
|
|
